Regalo Safety Gate User Manual | 9 pages - 1. Gate Frame
Looking for:
REGALO SAFETY GATE ASSEMBLY AND INSTALLATION INSTRUCTIONS MANUAL Pdf Download | ManualsLib |
Regalo baby gate manual -
Hide thumbs Also See for : Instructions manual 15 pages. Quick Links Download this manual. Table of Contents. Previous Page. Next Page. Indoor Furnishing Regalo Owner's Manual 40 pages. Page 3: Before Using Product Before Using Product Read and follow all instructions carefully to ensure that your gate and extensions are properly installed.
Improper installation could result in the gate becoming unstable or dislodged from the doorway. Always make sure the extension is securely attached to the gate before using.
NOTE: When installing any gate at its maximum width, use wall cups to ensure stability and safety. This is not a defect. Your gate is a pressure mounted gate and this gap will disappear once you tighten your gate in its opening.
STEP 1 Locate the 4 threaded spindle rods. Rotate the adjustment wheels on the threaded spindle rods in the opposite direction as in STEP 1, expanding the gap between the rubber foot and the adjustment wheel. Page 9 STEP 4 When you are satisfied with the general placement of your gate, fully tighten the threaded spindle rods attached to the lower corners of the gate by further rotating the adjustment wheels.
Continue by tightening the upper threaded spindle rods. As you tighten the upper threaded spindle rods, you will notice the gap between the door frame and the door begin to narrow.
Therefore, it is not necessary to use the screw attached wall cups in your door opening if you choose not to. However, if you are using the gate at the top of the stairs you must use the wall cups. Using the wall cups will affix your gate more firmly in the doorway or opening. Center each of the wall cups within the guide circles and use the provided self-tapping screws to fasten them in place via the hole through the center of each wall cup. Regalo International LLC.
Intended for young children aged six months through 24 months. Check the gate regularly to see if all the hard ware and mountings. To prevent serious injury or death,securely install gate or. Never use with a child able to climb over or dislodge the gate or. If not used,the gate could be dislodged from the opening. Previous Page.
Next Page. They are available at most retailers that carry our Regalo Products line of metal gates. Contact Regalo for questions and replacement parts. If in doubt concerning the use of your gate, call our customer care line at Page 2 Gate Instructions 3. Extensions List Item NO. Your gate is a pressure mounted gate and this gap will disappear once you tighten your gate in the doorway.
Page 4 Gate Instructions Step 3. Positioning and Attaching the Wall Cups to your door opening. Your gate is a pressure mounted gate. Therefore it is not necessary to use the screw attached Wall Cups to your door opening if you choose not to. Page 5 Gate Instructions Step 4.
You are now ready to install your gate in the doorway. Begin by positioning your gate level and centered in the doorway opening. Page 6 Gate Instructions Step 5.
You are now ready to do the Final Adjustment to fasten your gate firmly in the doorway. Continue to turn the lower Adjustment Wheels counter-clockwise until the Adjustment Wheels are firmly against the ends of the frame tubes. Page 7 Gate Instructions Next, tighten the top 2 Adjustment Wheels by turning them counter-clockwise.
Again, make sure both sides are equal as you tighten. As you tighten the Adjustment wheels you will notice the gap between the plastic gate door latch and the frame tube is narrowing.
Important: Keep these instructions for future reference Diagram G2: How to close and lock the Assemble the gate per the gate instructions. Choose the side of the gate to be extended and remove the top and bottom Adjustment Wheel Spindles.
Assemble the gate and extension as illustrated. This manual is also suitable for:
Comments
Post a Comment